|
Macintosh OS X Compatibility
05/2005
Most newer Macintosh computers introduced after January
1, 2003 will not provide for starting up in Mac OS 9.x
and many may not support OS X Classic mode.
IntelliKeys USB is the Mac OS X solution.
Classroom Suite and Overlay Maker 3
and ReadyMades are Mac OS X solutions
Using older IntelliTools software on a Mac OS X Computer
IntelliKeys USB is Mac OS X Compatible
Note:IntelliKeys Classic is not supported on OS X.
IntelliKeys USB software starting with version 2.0. is compatible with
Mac OS 10.1 or higher and the current version is available for download.
It is also available on CD for a nominal charge by contacting IntelliTools.
It is very important that you read the Read Me document installed with
IntelliKeys USB, as there are a few changes to the user interface specific
to Mac OS X. You will need to provide the computer's Mac
OS X Administrator passphrase to install the software. This software
only works with IntelliKeys USB. It does not work with IntelliKeys Classic.
Top
IntelliTools Software Mac OS X Compatibility
List
Classroom Suite version 3.x (first released 12/2003)
IntelliMathics 3 version 3.x (first released 12/2003)
IntelliTalk 3 version 3.x (first released 12/2003)
IntelliTools Reading: Balanced Literacy 1.2 (first released 3/2005)
IntelliPics Studio 3 version 3.x (first released 12/2003)
Overlay Maker 3 version 3.x (first released 12/2004)
ReadyMade Colorful Caterpillar 2.0 (first released 9/2004)
ReadyMade Five Cuddly Teddies 2.0 (first released 1/2005)
ReadyMade Primary Writing 3 3.x (first released 2/2005)
ReadyMade Primary Literacy 3 3.0 )first released 4/2005)
IntelliTools will announce future Mac OS X release plans for other IntelliTools
software titles on its web site (www.intellitools.com), and in its
electronic customer newsletter, "IntelliWorld."
Top
Using older IntelliTools software on a Mac OS X
Computer
If you are running in OS X, you'll want to re-start in OS 9.x:
- From under the blue Apple, select System Preferences
- Then select Startup Disk
- Highlight OS 9.x
- Close the Startup Disk window
- Re-start the computer
- Open your program
When you are running in OS 9.x and want to return to OS X:
- From under the rainbow colored Apple, select Control Panels
- Then select Startup Disk
- Highlight OS X
- Close the Startup Disk window
- Re-start the computer
Top
Using older IntelliTools software in "classic" mode
Overlay Maker 2.2d can run on OS X computers in "Classic" mode.
You will find current version information at IntelliTools
Software & Hardware Version Information
You can download updaters for some products at
Updaters
for the Macintosh Products Or you can contact Customer
Service at 800-899-6687 (info@intellitools.com) to find out if you are
eligible to purchase upgrades for the current shipping versions.
Top
Check the Apple Specifications, under Configurations:
Software. If Mac OS X and Mac OS 9 are listed, the computer will startup
in either OS X or OS 9. If Mac OS X alone is listed, the computer will
only start in OS X.
If you want to run older software in the Mac OS
X Classic mode, you should verify with Apple that the Mac OS X computer
is setup to support Classic mode.
Top
|